I finished another project today - the Shawn the Sheep zippered case.
I'm pretty happy with it. It is very cute and with a lining and a stocking stitch exterior, it would be quite a protective case.
I'm also happy with the lining I picked.
To get it to lie flat against the zipper tape, I did a running stitch as top-stitching. I didn't think the wool would go through my machine that well.
It was easy to do the zipper and line it. I followed the generic directions for a lined zipper bag.
Although I didn't get a picture, the mattress stitch up each side looked seamless.
That's another UFO off the list.
Tuesday, 15 May 2012
Cell Phone/iPod Cozy
(Wow! This is my 4th blog post today!)
I have been asked to teach a class of (28 - 30!!) adults in a continuing education program how to knit over a two day period in a couple of weeks. I figured a small, useful, garter stitch project would be a good project to get them started on.
My recommendation to their teacher was to try and scrounge knitting needles from colleagues and ask the students to see if their parents, grandparents or other family members might have knitting needles they could borrow. The teacher is going to provide the yarn and we'll be able to provide each student with a few extra grams of yarn than the cozy will require.
I thought it was important for the students to experience 100% wool so with a budget in mind, I suggested the teacher buy some Patons Classic Wool for the project. We should be able to wind off about 5 little balls of yarn from each 100g ball. She hopes to use her Michaels 40% off coupons. I will provide the buttons unless the students want to bring their own. Hopefully we'll be able to scrounge some darning needles as well for the finishing. I have a few students can borrow for the class.
So my design for an iPod or cell phone cozy was born. I customarily teach beginners the knitted cast on. I know it isn't used as much as the long-tail cast on but once the student has more or less mastered the knitted cast on, they have pretty much grasped the basics of knitting. I will also be teaching a bind off and (gasp!) even how to do a two-stitch buttonhole by binding off 2 sts and doing a twisted loop cast on in the next row.
Here is the project with the knitting completed. The buttonhole is visible near the pointy end.
After sewing the sides up with a whip stitch and sewing on the button, it is ready for its device.
Ta da!
I really think the students will be able to complete the project in a reasonable amount of time even if there's not enough class time allotted.
I think I'll knit up another one with snazzier yarn...
I have been asked to teach a class of (28 - 30!!) adults in a continuing education program how to knit over a two day period in a couple of weeks. I figured a small, useful, garter stitch project would be a good project to get them started on.
My recommendation to their teacher was to try and scrounge knitting needles from colleagues and ask the students to see if their parents, grandparents or other family members might have knitting needles they could borrow. The teacher is going to provide the yarn and we'll be able to provide each student with a few extra grams of yarn than the cozy will require.
I thought it was important for the students to experience 100% wool so with a budget in mind, I suggested the teacher buy some Patons Classic Wool for the project. We should be able to wind off about 5 little balls of yarn from each 100g ball. She hopes to use her Michaels 40% off coupons. I will provide the buttons unless the students want to bring their own. Hopefully we'll be able to scrounge some darning needles as well for the finishing. I have a few students can borrow for the class.
So my design for an iPod or cell phone cozy was born. I customarily teach beginners the knitted cast on. I know it isn't used as much as the long-tail cast on but once the student has more or less mastered the knitted cast on, they have pretty much grasped the basics of knitting. I will also be teaching a bind off and (gasp!) even how to do a two-stitch buttonhole by binding off 2 sts and doing a twisted loop cast on in the next row.
Here is the project with the knitting completed. The buttonhole is visible near the pointy end.
After sewing the sides up with a whip stitch and sewing on the button, it is ready for its device.
Ta da!
I really think the students will be able to complete the project in a reasonable amount of time even if there's not enough class time allotted.
I think I'll knit up another one with snazzier yarn...
Faux Cormo
A few weeks ago when I was at The Gathering in Port Hope, I picked up a couple of 50g bags of lime green roving. It wasn't until I got it home, I realized they were not only not the exact same colour but they weren't even the same breed of sheep! One bag was 50g of Key Lime Corriedale and the other was Lime Green Merino.
But the colours were close enough so I figured I'd spin them up and ply them together and have 50/50 Corriedale and Merino yarn - kinda like 'faux Cormo'.
I finished spinning the Corriedale a week or so ago and this evening at our spinning group, I finished spinning the Merino.
When I got home, I plied the two singles and ended up with a nice spool of 2-ply yarn, a little thicker than fingering weight.
It worked out to be 92g and 332g. (Sorry about the crappy photo)
There was a little bit left on the Merino spool so I Andean plyed it in preparation for plying it on the wheel. I learned how to do this when I did a spinning workshop on my UK knitting tour last fall.
It's a great way to prepare a single leaving an inside end (under my watch band) and an outer end which one can then ply together using a spindle or a wheel.
It was 8g of 100% Merino and 33 yd.
Now to find the perfect lace pattern for this handspun...
But the colours were close enough so I figured I'd spin them up and ply them together and have 50/50 Corriedale and Merino yarn - kinda like 'faux Cormo'.
I finished spinning the Corriedale a week or so ago and this evening at our spinning group, I finished spinning the Merino.
When I got home, I plied the two singles and ended up with a nice spool of 2-ply yarn, a little thicker than fingering weight.
It worked out to be 92g and 332g. (Sorry about the crappy photo)
There was a little bit left on the Merino spool so I Andean plyed it in preparation for plying it on the wheel. I learned how to do this when I did a spinning workshop on my UK knitting tour last fall.
It's a great way to prepare a single leaving an inside end (under my watch band) and an outer end which one can then ply together using a spindle or a wheel.
It was 8g of 100% Merino and 33 yd.
Now to find the perfect lace pattern for this handspun...
Monday, 14 May 2012
Finishing More UFOs
I'm forever sorting through the piles of paper (bills, patterns, recipes, etc.) on my desk and recently unearthed several UFOs. I finished the little flowerpot pin cushion the other day.
It was a 'make and take' project we did at the April meeting of the Trillium Embroidery Guild. It was designed by one of our guild members, Carol Arsenault, whose designs are featured in many stitching magazines around the world. This project is the embroidery project that appears on the cover of the current A Needle Pulling Thread magazine.
I had finished all the stitching which consisted of French and Colonial knots so I just needed to fill the flowerpot with fibrefill and glue the 'posies' to the top of the pot. It took about 5 minutes to finish it.
I also finally blocked the Shaun the Sheep project this morning. I modified the pattern somewhat from the original.
Here, you better can see the texture of the white yarn. It was a pain to work with but yielded the desired effect. I had the googly eyes left over from another project.
I'm going to use this fabric for the lining.
The bottom of the knitted piece will fold up and I'll add a zipper and lining and sew up the sides. I think it will look very spiffy once it's done.
It was a 'make and take' project we did at the April meeting of the Trillium Embroidery Guild. It was designed by one of our guild members, Carol Arsenault, whose designs are featured in many stitching magazines around the world. This project is the embroidery project that appears on the cover of the current A Needle Pulling Thread magazine.
I had finished all the stitching which consisted of French and Colonial knots so I just needed to fill the flowerpot with fibrefill and glue the 'posies' to the top of the pot. It took about 5 minutes to finish it.
I also finally blocked the Shaun the Sheep project this morning. I modified the pattern somewhat from the original.
Here, you better can see the texture of the white yarn. It was a pain to work with but yielded the desired effect. I had the googly eyes left over from another project.
I'm going to use this fabric for the lining.
The bottom of the knitted piece will fold up and I'll add a zipper and lining and sew up the sides. I think it will look very spiffy once it's done.
Real Italian Souvenirs
While on our epic cruise/Italian land tour last month, we did a bit of shopping. I didn't have anything particular in mind until I saw these Italian landmark beads in Florence. They are Tedora charms and are compatible with Pandora beads.
Skip bought me the first one for my birthday.Il Duomo |
Ponte Vecchio |
Il Giglio - symbol of Firenze |
![]() |
La Bocca della Verità |
The Pantheon |
Colosseum |
and these are the Roman Beads (with the Pandora suitcase bead).
Thursday, 10 May 2012
Shuttlebugs
One of our spinning group's members, Diane, is a member of the Shuttlebugs Weaving and Spinning Guild in Greenwood, ON. She was so enthusiastic about them she inspired Jennifer, Julia and me to check them out and perhaps join and learn to weave. They have Leclerc Dorothy table looms to loan us as we learn. They meet the 2nd Wednesday of the month so we attended the meeting this week.
Last weekend was WASOON - Weavers And Spinners Of Ontario North in Elliot Lake. The weaving and spinning weekend takes place every year rotating among the cities of northern Ontario.
Most of the meeting consisted of reports about WASOON by three members who attended.
At one of the workshops, they learned how to make toggle buttons from rolled up triangles of leather - the same way you'd roll up a crescent roll.
And every month there is a time for 'Show and Tell'. Here's a cute, little bookmark someone made.
The Shuttlebugs seemed pleased that the four of us were interested in learning their craft. They've arranged to have someone teach us how to weave and our first lesson will be on Monday, May 21.
What really inspired my interest in learning how to weave was seeing the lovely things on this blog. I really want to make this scarf. It only took one skein of Misti Alpaca Hand Painted Sock yarn!
On my way back home, I dropped into the Whitby Civic Recreation Complex to see if they were willing to allow the Whitby Spinners to use part of their space for our Monday night spinning get-togethers. The administrator I spoke to thought it would be a great idea and gave us a couple of areas to choose from in the building. I picked a spot where we'd be very visible but not in a major traffic zone. The best part of this is that it's not going to cost us anything as we are a not-for-profit community group. It's free!! Wheeee!!!
Tomorrow morning I'm going to attend the Alpaca Shearing and Wool Day at Windreach Farm. I'll be taking my wheel and hope to get the last of the lime green merino spun up. I'll try to remember to take some pictures.
Last weekend was WASOON - Weavers And Spinners Of Ontario North in Elliot Lake. The weaving and spinning weekend takes place every year rotating among the cities of northern Ontario.
Most of the meeting consisted of reports about WASOON by three members who attended.
At one of the workshops, they learned how to make toggle buttons from rolled up triangles of leather - the same way you'd roll up a crescent roll.
And every month there is a time for 'Show and Tell'. Here's a cute, little bookmark someone made.
The Shuttlebugs seemed pleased that the four of us were interested in learning their craft. They've arranged to have someone teach us how to weave and our first lesson will be on Monday, May 21.
What really inspired my interest in learning how to weave was seeing the lovely things on this blog. I really want to make this scarf. It only took one skein of Misti Alpaca Hand Painted Sock yarn!
On my way back home, I dropped into the Whitby Civic Recreation Complex to see if they were willing to allow the Whitby Spinners to use part of their space for our Monday night spinning get-togethers. The administrator I spoke to thought it would be a great idea and gave us a couple of areas to choose from in the building. I picked a spot where we'd be very visible but not in a major traffic zone. The best part of this is that it's not going to cost us anything as we are a not-for-profit community group. It's free!! Wheeee!!!
Tomorrow morning I'm going to attend the Alpaca Shearing and Wool Day at Windreach Farm. I'll be taking my wheel and hope to get the last of the lime green merino spun up. I'll try to remember to take some pictures.
Sunday, 6 May 2012
Knitting Sunshine
I finished Jennifer's Angel Lace Shawl and got it blocked yesterday.
The yarn is Indigodragonfly Sea Cell Silk - 60% Sea Cell/40% Silk in the What the Hay?! colourway.
I really liked the deep yellow colour. Here's the obligatory sofa shot.
I still am amazed at what a hard blocking does to a blob of knitted lace.
I'm pretty sure she'll like it. :-)
The yarn is Indigodragonfly Sea Cell Silk - 60% Sea Cell/40% Silk in the What the Hay?! colourway.
I really liked the deep yellow colour. Here's the obligatory sofa shot.
It reminds me of sunshine and sunny days.
It would look smashing covering a dark or white shirt... or any blue or green top.I'm pretty sure she'll like it. :-)
Subscribe to:
Posts (Atom)